RDL RU-VSX4 Video Switcher - 4x1 - BNC
800.466.0449
| Input Impedance: | 5 kΩ bridging 75 Ω line |
| Gain: | Unity, (75 Ω terminated input; 75 Ω terminated output) |
| Load Impedance: | 75 Ω |
| Outputs (5): | 4 LOOP OUT from input signals; 1 amplified output |
| Operating Signal Level: | 0.5 to 1.0 V p-p |
| Frequency Response: | 10 Hz to 10 MHz (+/- 0.35 dB) |
| Noise: | < -70 dB below 1 V p-p |
| Crosstalk: | < 55 dB |
| Off Attenuation: | > 65 dB |
| Differential Gain: | 0.1% |
| Differential Phase: | 0.3 degree |
| Connector Type: | BNC, gold plated |
| External Control Inputs: | Electronic or mechanical closure to ground, 1mA |
| External Control Outputs: | 4 @ 25 mA, Open-collector to ground |
| Power Requirement: | GROUND-REFERENCED, 24 to 33 Vdc @ 110 mA |
| Ambient Operating Environment: | 0° C to 55° C |
| Brand | Radio Design Labs | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Radio Design Labs | ||||||||||||||||||||||||||||||||
| SKU | RU-VSX4 | ||||||||||||||||||||||||||||||||
| UPC | 813721012838 | ||||||||||||||||||||||||||||||||
| Part No | RU-VSX4 | ||||||||||||||||||||||||||||||||
| Weight (lb.) | 1 | ||||||||||||||||||||||||||||||||
| Product Datasheet | ru-vsx4.pdf | ||||||||||||||||||||||||||||||||
| Unit | EACH | ||||||||||||||||||||||||||||||||
| Carton Quantity | 1 | ||||||||||||||||||||||||||||||||
| Short Description | The RU-VSX4 is the ideal choice in most applications where four video signals need to be switched to a single output. The RU-VSX4 has two rear panel-jacks for each of the four video bridging input stages. One jack is for the input signal; the other is a loop-through output of the source signal. If 75 Ω termination of the input signal is required, the terminator (provided) is plugged onto the LOOP OUT jack. The output video signal is 75 Ω back-terminated to provide unity gain into a 75 Ω terminated input. The front-panel features 4 high-reliability keyboard style pushbuttons with LED indicators corresponding to each video input. The LED indicator shows which video source is active. If the button for an active source is pushed, all video sources are turned off until the next source selection. A front panel LOCAL/REMOTE toggle switch activates either the front-panel buttons or a rear-panel connected remote control. |
||||||||||||||||||||||||||||||||
| Description |
|
-
RDL Line-Level Bi-Directional Network Interface - 4 Balanced Line Inputs, Dante Input - 4 Balanced Line Outputs, Dante Output - with PoE (RU-LB4P)![radio design labs]( "Radio Design Labs")
Part No: RU-LB4PYour Price $805.69List Price $1,074.25You Save 25%11 In stock -
-
RDL Network to Format A Interface/Distributor - Dante Input - 3 Format A, 1 Balanced Line Aux Outputs - with PoE (RU-NFDP)![radio design labs]( "Radio Design Labs")
Part No: RU-NFDPYour Price $775.77List Price $1,034.35You Save 25%56 In stock -
-
RDL Mic/Line Bi-Directional Network Interface - 4 Switchable Mic or Line Inputs, Dante Input - 4 Balanced Line Outputs, Dante Output (RU-MLB4)![radio design labs]( "Radio Design Labs")
Part No: RU-MLB4Your Price $843.13List Price $1,124.17You Save 25%10 In stock -
-
RDL Mic/Line Bi-Directional Network Interface - 4 Switchable Mic or Line Inputs, Dante Input - 4 Balanced Line Outputs, Dante Output - with PoE (RU-MLB4P)![radio design labs]( "Radio Design Labs")
Part No: RU-MLB4PYour Price $914.24List Price $1,218.99You Save 25%10 In stock -
