RDL TX-TPS6A Passive Single-Pair Sender-Twisted Pair Format-A

Part No:
TX-TPS6A
Unit of Measure: EACH
Ships from: Arizona
$119.16
List Price: $158.88
  
You save 25%
10 In stock
Is This The Right Item For Me?
800.466.0449
Input:Low-impedance Balanced;
Recommended source impedance < 150 Ω
Input Connection:Detachable Terminal Block (Balanced)
Input Level:+4 dBu balanced; +22 dBu Max
Format-A Signal Pair Used:Switch-selectable A, B, or C
Format-A Input:RJ45 LOOP IN
Output:RDL TP Format-A
Output Connection:RJ45
Frequency Response:20 Hz to 20 kHz (+/- 0.1 dB)
THD+N:< 0.035% (50 Hz to 20 kHz, +4 dBu);
< 0.1% (20 Hz to 20 kHz, +4 dBu)
Headroom above +4 dBu:> 18 dB
CMRR:> 85 dB (50 Hz to 150 Hz)
Power Requirement:Passive
Dimensions:3.0" (7.6 cm) W; 1.6" (4.08 cm) H; 2.09" (5.3 cm) D
Ambient Operating Environment:0° C to 50° C
More Information
Brand Radio Design Labs
Manufacturer Radio Design Labs
SKU TX-TPS6A
UPC 813721016201
Part No TX-TPS6A
Weight (lb.) 1
Product Datasheet tx-tps6a.pdf
Unit EACH
Carton Quantity 1
Short Description

The TX-TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One low-impedance +4 dBu balanced line-level audio source connects to the module using the detachable terminal block. A studio-quality transformer provides isolation between the audio source and the RJ45 OUTPUT.

The TX-TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the front-panel switch during installation. This module drives only one cable pair, therefore a LOOP IN RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to the LOOP IN jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The TX-TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.

The TX-TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to the LOOP IN jack, that power is passed through to the modules connected to the OUTPUT jack.

Description
Input:Low-impedance Balanced;
Recommended source impedance < 150 Ω
Input Connection:Detachable Terminal Block (Balanced)
Input Level:+4 dBu balanced; +22 dBu Max
Format-A Signal Pair Used:Switch-selectable A, B, or C
Format-A Input:RJ45 LOOP IN
Output:RDL TP Format-A
Output Connection:RJ45
Frequency Response:20 Hz to 20 kHz (+/- 0.1 dB)
THD+N:< 0.035% (50 Hz to 20 kHz, +4 dBu);
< 0.1% (20 Hz to 20 kHz, +4 dBu)
Headroom above +4 dBu:> 18 dB
CMRR:> 85 dB (50 Hz to 150 Hz)
Power Requirement:Passive
Dimensions:3.0" (7.6 cm) W; 1.6" (4.08 cm) H; 2.09" (5.3 cm) D
Ambient Operating Environment:0° C to 50° C

Zack Electronics Large Quantity Quote Request

The Zack Electronics Quick Quote system will notify us of your interest in purchasing a large quantity of this item:

Write Your Own Review
How do you rate this product?

Write your own Review