RDL ST-ACR1M Microphone Level Audio Controlled Relay-0.5 to 5 s delay
Part No:
ST-ACR1M
Unit of Measure: EACH
Ships from: Arizona
$142.27
List Price:
$189.70
You save 25%
41 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449
Audio Input: | 10 kΩ balanced bridging |
Input Connections: | May be connected balanced or unbalanced |
Control Output: | Open-collector @ 25 mA suitable to drive indicators or slave LCR relay |
Indicators: | Audio threshold LED (for setting sensitivity) |
Retrigger delay: | 250 ms |
Contacts: | Double-pole-double-throw |
Max. Switching Power: | 60 W, (220 Vdc, 125 Vac, 2A0 |
Activation response time: | 25 ms |
Input Sensitivity: | -60 dBu to -20 dBu (adjustable) |
Relay Release Delay: | 0.5 sec. to 5.0 sec. nominal (adjustable) |
Power Requirement: | GROUND-REFERENCED, 24 to 33 Vdc @ 50 mA* * Assumes 20 mA max load at SLAVE output |
Ambient Operating Environment: | 0° C to 55° C |
Brand | Radio Design Labs | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | Radio Design Labs | ||||||||||||||||||||||||
SKU | ST-ACR1M | ||||||||||||||||||||||||
UPC | 813721011169 | ||||||||||||||||||||||||
Part No | ST-ACR1M | ||||||||||||||||||||||||
Weight (lb.) | 0.5 | ||||||||||||||||||||||||
Product Datasheet | st-acr.pdf | ||||||||||||||||||||||||
Unit | EACH | ||||||||||||||||||||||||
Carton Quantity | 1 | ||||||||||||||||||||||||
Short Description | Each of the ST-ACR products is an Audio Controlled Relay in the STICK-ON® series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST-ACR-1M is designed to switch on low-level sources, such as microphones or mic-level sources. Two multiturn trimmers are provided. The SENS potentiometer adjusts the audio input sensitivity. A threshold LED facilitates accurate adjustment. The module can be set to trigger on signals between -65 dBu and -20 dBu. The DELAY control sets the time required for the relay to release when the audio drops below the threshold. The adjustment range is from 0.5 seconds to 5 seconds. |
||||||||||||||||||||||||
Description |
|
Write Your Own Review