RDL ST-EQ3 3 Band Equalizer - Line Level
Part No:
ST-EQ3
Unit of Measure: EACH
Ships from: Arizona
$138.24
List Price:
$184.32
You save 25%
45 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449
Input: | 100 kΩ balanced or unbalanced bridging; line-level |
Gain: | OFF to unity (adjustable, +/- EQ adjustment) |
THD+N: | < 0.030%; 0.010% typical (1 kHz flat response) |
CMRR: | > 60 dB (100 Hz) |
Frequency Response: | |
Into 600 Ω: | 20 Hz to 22 kHz (EQ set flat; +/- 0.5 dB) |
Into bridging load: | 10 Hz to 22 kHz (EQ set flat; +/- 0.5 dB) |
Noise: | < -80 dB (below +4 dBu) |
Center Frequencies: | LOW Band: 80 Hz MID Band: 1 kHz HIGH Band: 30 kHz |
Bandwidth at 3dB EQ: | LOW Band: 20 Hz to 300 Hz MID Band: 200 Hz to 7 kHz HIGH Band: 3 kHz to 30 kHz |
Power Requirement: | GROUND-REFERENCED, 24 to 33 Vdc @ 25 mA |
Ambient Operating Environment: | 0° C to 55° C |
Brand | Radio Design Labs | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | Radio Design Labs | ||||||||||||||||||||||||
SKU | ST-EQ3 | ||||||||||||||||||||||||
UPC | 813721011121 | ||||||||||||||||||||||||
Part No | ST-EQ3 | ||||||||||||||||||||||||
Weight (lb.) | 1 | ||||||||||||||||||||||||
Product Datasheet | st-eq3.pdf | ||||||||||||||||||||||||
Unit | EACH | ||||||||||||||||||||||||
Carton Quantity | 1 | ||||||||||||||||||||||||
Short Description | The ST-EQ3 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 Ω balanced, and is intended to drive unbalanced or balanced lines of 150 Ω or higher impedance. Equalization is accomplished by three active circuits, each controlling a separate audio band. These bands were carefully selected to yield a module that works effectively in a wide variety of systems. Setup of the ST-EQ3 is assisted by a peak overload LED which indicates excessive pre or post EQ levels. |
||||||||||||||||||||||||
Description |
|
Write Your Own Review